My Cart 0 item - $0.00

You have no items in your shopping cart.

12V 82Ah BATTERY Sealed MAINTENANCE FREE DEEP CYCLE Marine RV 4WD Boats Caravan

CLICK TO ENLARGE

12V 82Ah BATTERY Sealed MAINTENANCE FREE DEEP CYCLE Marine RV 4WD Boats Caravan

Model Number: HCM24SMF

Based on 0 review
Write a review
$239.00

In stock

Add to Wishlist

Marine & 4WD - 12 Months

Estimate Shipping

Enter your destination to get a shipping estimate.

  • How much for delivery?

    Enter your postcode for estimated shipping.

Key Features

  1. Thicker plates to resist corrosion.
  2. More paste on plates for additional capacity.
  3. High density paste for increased endurance.
  4. Thicker separators to resist punctures and treeing shorts.
  5. Additional reserve electrolyte for longer battery life.

*PLEASE NOTE - DUE TO THE HIGH POSTAGE COST TO CERTAIN AREAS OF AUSTRALIA, A SHIPPING SURCHARGE WILL APPLY TO THE FOLLOWING POSTCODE ZONES: NORTH QLD: 4806 – 4899, 9960 – 9999, NORTHERN TERRITORY: 0800 – 0999 AND WESTERN AUSTRALIAN: 6215 -6699, 6700-6799. FOR ALL OTHER AREAS EXCLUDING ABOVE POSTCODES, PLEASE CHECK POSTAGE/SHIPPING SECTION OR DROP US AN EMAIL IF YOU WOULD LIKE TO DISCUSS ABOUT YOUR POSTAGE IN THOSE AREAS.

___________________________________________

Our HCM24SMF ACDelco Sealed Maintenance Free (SMF) Batteries feature lead calcium expanded grids (lead calcium technology) for improved resistance to corrosion, overcharging, gassing, water usage, self discharge and thermal runaway, all of which limit battery life in conventional lead acid batteries. Suitable for Boats, Caravans, Campers, RV's, 4WD's.  The range includes batteries to suit cranking / starting (traditional automotive), high cycle, dual purpose starting / deep cycle and deep cycle applications.

ACDelco Deep Cycle Batteries differ from traditional batteries with:

  • Thicker plates to resist corrosion.
  • More paste on plates for additional capacity.
  • High density paste for increased endurance.
  • Thicker separators to resist punctures and treeing shorts.
  • Additional reserve electrolyte for longer battery life.

All ACDelco Deep Cycle Batteries have combined benefits of a true deep cycle and calcium maintenance free technology and they are sealed maintenance free for worry free operation.

FEATURES & BENEFITS:

  • Inbuilt hydrometer (most batteries) - Indicates state of charge
  • Factory sealed - makes these batteries truly maintenance-free
  • Polypropylene case - Reinforced design in precisely tailored to support the battery elements to withstand road shock and vibration. This strong durable material combines light weight with high impact strength
  • Liquid-gas separator area - Returns liquid to reservoir for longer life
  • Integrated or rope handle - For ease of transport and installation
  • Flame arrestor - Safety system, prevents explosion from sparks outside the battery, minimizes acid leakage and prevents inflow of dust
  • Heat sealed covers - Helps prevent electrolyte contamination and increase case strength
  • Centered cast on plate strap - Stronger than thinner gas-burned conventional connectors
  • Low resistance envelope separators - Encapsulated negative plates help to prevent shorting / treeing between negative and positive plates as well as aid in vibration durability
  • Increased battery shelf life - Up to 12 months shelf life without charging due to the use of Calcium / Calcium grids (compared to conventional batteries)

Installation Guidelines:

General Precautions

  • Wear appropriate protective clothing and safety glasses
  • Before removing an old battery, make sure the engine, lights and all accessories are turned off
  • Check if vehicle has a computerized electrical system. If so, an alternative power source to maintain electronic memory when battery is disconnected may be required (to avoid damage to the main computer or other segments of the vehicle's electronically controlled equipment)
  • Check if the vehicle has air bags fitted. If so, see following...

Removal of Old Battery

  • Note location of positive (+) terminal and mark polarity on positive cable
  • Remove the negative or earth (-) terminal first to avoid damaging the wiring or battery by accidentally grounding tools
  • Remove second (+) terminal
  • Undo the hold-down clamp and remove old battery, noting position of terminal posts


New Battery Installation

  • Inspect tray and area for corrosion and replace or repair as necessary
  • To clean tray, scrub the area with water and baking soda (sodium bicarbonate), then rinse with water
  • Dry and paint corroded steel parts with acid proof paint
  • Clean and brush terminals
  • Check cable and starter motor connections, tighten if necessary
  • Replace terminal clamps and / or cables if badly corroded
  • Sit the new battery in the tray ensuring it's level and that the terminal posts are correctly positioned
  • Secure battery with hold-downs, tightened to ensure battery can't move in the tray
  • Apply a thin coating of high temperature grease to the posts and cable connections
  • Replace cables ensuring that the earth (-) terminal is connected last
  • Tighten connections but don't over tighten
  • Never hammer cable connections onto battery posts as this can damage your battery

Safety Precautions for Vehicles Fitted with an Air Bag

  • Always check to ensure that the ignition is off before removing either of the battery terminals
  • Don' sit behind the steering wheel or in other seats with an air bag while any electrical service work is carried out on the vehicle.
  • Removing or replacing battery terminals will not unintentionally trigger an air bag system, however removal of battery terminals with the ignition on can cause damage to electronic components, including the air bags - so don't do it
  • If you need to work on the electrical system beyond replacing the battery, you must electrically disable the air bag system first
  • Never indiscriminately probe the electrical wiring / connectors in or near the steering column
  • Most air bag systems use bright yellow wiring and harness connectors - do not interfere with any harness of this colour

Safety Precautions:

Disconnection Safety
Always turn battery charger or ignition off before disconnecting a battery

Correct Lifting Procedure
Caution batteries are heavy therefore ACDelco recommends using correct lifting procedure when handling

Possible Failure Causes:

Mistreatment:

  • Striking a battery terminal or cable end with a hammer to loosen it can totally ruin a battery,
  • Dropping a battery or tipping it on its end or upside down can also damage a battery,
  • Storing batteries near flames or sparks can cause the battery to explode,

Overcharging:
Caused by incorrect voltage setting, low voltage caused by heat or internal defects, or old batteries,

Old Age:
All batteries have a limited lifespan and will naturally break down over time and use (ACDelco's Sealed Maintenance Free Batteries have features which make them one of the longest lasting batteries on the market),

Vibration:
Batteries can fail due to prolonged vibration, usually caused by a loose tray and or broken hold-downs.

 

Specifications

Battery: ACDelco HCM24SMF
Weight: 19.2kg's
CCA: 600
AH: 82
Volt: 12 V
Certificate: ISO9001
Warranty: Marine & 4WD - 12 months
Dimensions (L x W x H): 269 mm x 176 mmx 225 mm
Battery: ACDelco HCM24SMF
Weight: 19.2kg's
CCA: 600
AH: 82
Volt: 12 V
Certificate: ISO9001
Warranty: Marine & 4WD - 12 months
Dimensions (L x W x H): 269 mm x 176 mmx 225 mm

We operate a strictly online retail business, so Pick-up is not available and we are unable to make any exceptions At present, shipment is only within Australia.

Items are generally dispatched within 1 working day after payment is cleared (in some rare cases, dispatch may take 2 working days). Delivery can take 3-8 working days. Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavour to send all our items with tracking numbers, there may be a few smaller items that are not sent with a tracking number.

Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made. Online Distribution Australia is not liable for any delays, losses and/or damage to items due to changes of delivery address after checkout, or mistakes made by buyers.

Re-delivery fee may be charged to buyers for items that are undeliverable and/or returned to Online Distribution Australia due to incorrect delivery address or unsuccessful deliveries.

Items will only be delivered during normal working hours (9am to 5pm on weekdays). Delivery is not available on weekends, public holidays or after business hours.

90 days warranty will apply to all Online Distribution Australia products unless the corresponding listing states otherwise.

If items show symptoms of operational failure, are defective or are broken (a.k.a. "DOA" or Dead on Arrival), buyers must contact us via eBay message within 7 days with a full and detailed description of the issue. Online Distribution Australia reserves the rights to reject any claims made after 7 days for DOA cases.

If the product is assessed to be DOA, buyers will receive a full or partial refund, or a replacement product or parts. If buyers are requested to send back defective items, a replacement will be sent to buyers after we receive the returned product back in our warehouse. In such cases, we will cover the return freight charges. Such returned products will become our property and the replacement will be the buyer's property.

Replacement products are provided with the same warranty as the returned products. Online Distribution Australia is not liable for items that have been misused, mishandled or incorrectly installed. Buyers should read the instruction and advise given by manufacturers and suppliers before use.

All accessories and bonus gifts are not covered by the warranty.

Warranty

Marine & 4WD - 12 Months

What’s in the box?

1 x ACDelco HCM24SMF Sealed Maintenance Free Battery

Review

Customer Reviews

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating